Rivian R1T/R1S Full Front Bumper Paint Protection Film PPF

  • Sale
  • Regular price $109.95
Shipping calculated at checkout.


Rivian Bumper Guard Against Road Hazards

Custom made for the Rivian R1T and R1S, this top-of-the-line PPF provides unmatched protection for your vehicle’s front and rear bumpers. Designed to combat everyday challenges, our PPF ensures your Rivian's front bumper stays protected from road debris, insect splatter, bird droppings, tar, parking scratches, and harsh weather elements, preserving its pristine condition. Easy to apply and virtually invisible, it maintains the pristine appearance of your Rivian while offering the best in protection.

  • Rivian Front Bumper Film 
  • Squeegee
  • Cleaning Wipes
  • Microfiber Towel
  • Spray Solution Bottle 
  • Fits Rivian R1T/R1S 2022 - 2023
  • Made out of Avery Dennison Supreme Defense Film
  • Proudly Made in California, USA

Application Time: 40 minutes
Application Difficulty: Level 3

Step-by-Step Guide for Installing Your Rivian Front Bumper Film

Step 1: Ensure the area where you'll place the PPF is clean. Next, create a slip solution mixture of 10% dish soap and 90% water in the spray bottle 

Step 2: Use the provided spray bottle with soapy water to wet your hands, the PPF, and the area you're applying it to.

Step 3: After applying the PPF, use the provided squeegee to remove any excess water trapped underneath the film. This will help the PPF adhere firmly to the cars surface. If you are unsure about the positioning of the PPF, you can lift it, reapply the slip solution (step 2), position it to your liking, and then use the squeegee again (step 3).

Step 4: Wait a minimum of 48 hours before washing your car to allow the PPF to set properly.

Maintenance Guide for Your Rivian Front Bumper Film

How Long Should I Wait Before Touching the Newly Applied Protection Film?
The protection film will take approximately 48 hours to settle and cure. During this time, avoid touching the film, as initial bubbling is normal and will dissipate once curing is complete. Avoid washing or driving your car; if driving is unavoidable, be gentle with the coating to ensure proper curing.

How to Clean Your Film-Coated Car Safely and Effectively?
To clean your car's film coating, gently use a microfiber mitt with car wash soap, and soak any hard-to-clean spots for a few minutes. For extra tough stains, apply 99% isopropyl alcohol or lacquer thinner, and always dry the surface with a microfiber towel. Avoid brushes, terry cloths, or paper products as they can damage the film, especially around its edges.

 

Application Walk-through video:

Q: Is it easy to install the film cutout myself or do I need to hire a professional?
A: Thanks to our precise, easy handling cuts, our film kits are easy for you to install so there is no need to hire a professional. We also provide step-by-step instructions on how to install your cutout along with a comprehensive walk-through video for you to follow along.   

Q: Can I remove the film without damaging the vehicle's paint?
A: Our film is GUARANTEED not to leave any sticky residue and will remove cleanly making the removal process a breeze without damaging your vehicle's paint.

Q: What should I do after installing the PPF to ensure its effectiveness?
A: To ensure the effectiveness of the PPF, we suggest waiting for at least 24 hours before driving your vehicle to allow it to fully adhere to the surface and prevent water and debris from getting underneath. During the 24 hour period, it is also advisable to avoid washing your vehicle or exposing it to extreme weather conditions.

Q: I have wrinkles (fingers) appearing while installing the PPF, how do I remove them? 
A: If you notice wrinkles, or fingers, forming while installing the PPF, don't worry, it's a common occurrence. Using a heat gun or hair dryer, gently warm up the film to make it more pliable. Once it's warm, use the squeegee provided to smooth out the wrinkles. Start from the center and work your way out to the edges to avoid creating new wrinkles. It's important to use a light touch with the squeegee and be cautious not to apply too much heat as this can damage the film.  

Q: How long can I expect PPF to remain effective on my vehicle?
A: Avery Dennison assures us that this material is durable and has a life span of 10 years.

Q: What should I do if there are visible bubbles in the PPF after installation?
A: To address visible bubbles in the PPF after installation, we suggest that you lift the affected area and use a squeegee to smooth out the bubbles. However, for relatively small bubbles, it's safe to leave them alone as they will eventually dissipate on their own.